No.
1200-MSF Series High
Temperature, High Performance Industrial
Heat Resistant Coatings are based
on a modified silicone resin fortified
with ceramics. The system cures by
solvent evaporation, polymerization
and subsequently the fusion of the
ceramics. Cures at 400F (204C) in
one hour. Available in Silver and
Black, Flat Finish. Note: Black is
subject to color change at 1000F (538C),
Silver will not change color.
Use wherever maximum resistance to
heat and chemicals is required. This
product is a high performance coating,
exceeding the performance of U.S.
Federal Specification No. TT-P-28.
For use on interior and exterior surfaces
such as stacks, pipes, stoves, mufflers
and other metal parts. Resistant to
temperatures up to 1200F (649C). Not
recommended for use on the inside
of ovens, stacks, etc.)
No. 1200-MSF is primarily designed
for use on high temperature smoke
stacks, boiler fronts, doors, breaches,
jet and turbine engine components,
mufflers and other surfaces where
curing is easily facilitated by operational
heat. Provides excellent resistance
to corrosive atmospheric environmental
conditions as well as high temperature.
Care must be taken that surface temperatures
do not exceed 1200F (649C)
No. 1500
Series Ultra Hi-Temperature
High Performance Industrial Heat Resistant
Coatings are based on pure silicone
resins with special ceramic colorants
and additives. These coatings cure by
catalyzation, polymerization and by
subsequent fusion and complexing of
the metallics and ceramics. May be used
on steel, castings and other metals
capable of withstanding ultra high temperatures.
No. 1500 series are also suitable for
use on stainless steel surfaces. They
are formulated with special ingredients
to minimize contamination from chlorides,
other halides, sulfides, nitrates and
metals which are known to induce external
stress corrosion cracking. They contain
no free metalic zinc and, therefore,
will not contribute to embrittlement
of stainless steel welds.
Use wherever the ultimate in heat
resistance is required. Can be used
where temperatures are above the decomposition
point of conventional silicone high
temperature paints. The metal substrate
must be of a type that will withstand
highly oxidative conditions developed
at ultra high temperatures. Ordinary
cold rolled steel, for example, may
delaminate and fracture at these high
temperatures, decreasing the life
expectancy of the surface. Can be
used on crackers, furnaces, manifolds,
turbines and jet engine components,
etc., that will be subjected to service
temperatures up to 1500F (815C). Not
recommended for use on the inside
of ovens, stacks, etc.
Performance Information: No 1500
series cure by (1) polymerization
(2) fusion of ceramics and (3) by
metal complexing. The coating must
be cured for a minimum of one hour
at 450F (232C) before being subjected
to high temperature service. During
curing, the coating polymerizes, forming
a string physical bond to the steel.
When subjected to high temperatures
the fusion of the ceramics, coupled
with the metal complexing, creates
a chemical – physical bond to
the substrate that allows the coating
to withstand temperatures up to 1500F
(815C)
Available colors:
- No 1 Black No 6 Newport No 12
Camouflage
- No 2 Silver No 8 Walnut No 14
Golden
- No 4 Topaz No 10 Russet No 15
Charcoal
All colors will withstand 1500F (815C)
without color change.
|
