No.
500 Series Heat Resistant Coatings
are based on a one component specially
modified epoxy ester resin. The coatings
air dry by polymerization and oxidation
to form a tough, durable, heat, chemical
and moisture vapor resistant film.
They do not require any complex heat
curing schedule to obtain their heat
resistant properties.
Recommended for use wherever resistance
to heat, humidity and corrosive atmospheric
conditions. Can be used as a protective
and decorative coating on metal parts,
mufflers, hot water and steam lines,
etc., where operating temperatures
will not exceed 500F (260C). Provides
excellent resistance to corrosive
atmospheres, hostile environmental
conditions, and temperatures up to
500 F (260C)
No.
850 Series Heat Resistant Coatings
are based on a specially modified
silicone-alkyd resin. The coatings
air dry to a tough, hard, weather
resistant finish. Special pigments
are utilized to achieve maximum heat
resistant properties. The curing mechanism
is a unique combination of solvent
evaporation and resin cross linking.
They do not require any complex heat
curing schedule to obtain their heat
and weather resistant properties.
Recommended for use wherever maximum
resistance to heat, humidity and weather
is required. Can be used on heaters,
stacks, boilers, breeches, mufflers,
radiators, storage tanks, pipelines,
steam lines, etc. where operating
temperatures will not exceed 850F
(454C).
This very unique coating performs
as well as many of the pure silicone
based paints, but has the distinct
advantage of curing at room or ambient
temperature and can be used over No.
850 Primer or applied directly to
clean steel. It has exceptional heat
resistant properties, excellent weathering
characteristics and good corrosion
protection.
No. 500 and No. 850 Series coatings
are suitable for use on stainless steel
surfaces. They are formulated with special
ingredients to minimize contamination
from chlorides, other halides, sulfides,
nitrates and metals which are known
to induce external stress corrosion
cracking. They contain no free metallic
zinc and, therefore, will not contribute
to embrittlement of stainless steel
welds.
They are not recommended for
use on the inside of ovens, stacks,
etc. Do not use over zinc galvanize
or zinc rich coatings.
These coatings have Semi
Gloss finishes in colors as follows:
- No 1 Black
- No 9 Fawn
- No 17 Steel
- No 2 Silver
- No 10 Russet
- No 18 White
- No 3 Lagoon
- No 11 Quarry
- No 19 Safety Blue
- No 8 Walnut
- No 16 Steel Primers (Red,
Gray, White)
|
- No 4 Topaz
- No 12 Camouflage
- No 20 Safety Orange
- No 5 Horizon
- No 13 Dusty
- No 21 Safety Green
- No 6 Newport
- No 14 Golden
- No 22 Safety Yellow
- No 7 Mauve
- No 15 Charcoal
- No 23 Safety Red
|
Note: Some colors are
subject to color change beginning
at various temperatures
See specific product data sheets
for detailed information on application,
characteristics, maintenance and precautions
for these coatings
|
