Flame
Control No. 30-30 Semi-Gloss Class
“A” Enamel Overcoat
is an interior paint which is recommended
for use as an overcoat in areas where
maximum ease of cleaning, durability
and fire rating is required. No. 30-30
was designed as an overcoat for Flame
Control No. 10-10 and No. 20-20 fire
retardant paints to substantially
increase durability. It may also be
used alone as a fire resistant coating
on non-combustible surfaces where
a Class “A” fire retardant
finish must be maintained. Available
in non-yellowing white and may be
tinted at 4 ounces of colorant per
gallon maximum.
Fire hazard classification
when tested in accordance with ASTM
E-84 Standard. ( applied to GRC Board)
| Coating
System |
Flame
Spread |
Smoke
Developed |
Primer
- optional
Type 30-30 applied in one coat
at 400 sq.ft./US gal (9.83 sq.m./L)
5 20
No top coat required
|
5 |
20 |
Flame
Control No. 40-40 Low Gloss Class
“A” Latex Overcoat
is a general purpose interior water
base paint that is fire rated over
non-combustible surfaces, and as an
overcoat for Flame Control intumescent
fire retardant paints. It dries quickly
to yield a scrub resistant, water
resistant film that is easy to clean
and possesses excellent adhesion,
flexibility and toughness. No. 40-40
is suitable for application to all
interior surfaces (except floors and
shelving). It can also be used on
exterior masonry surfaces where a
water resistant, decorative coating
is required. Available in White or
Black and may be tinted at 4 ounces
of colorant per gallon maximum.
For maximum durability, top
coat with Flame Control No.
40-40 or No.
30-30 Overcoat
Underwriters’ Laboratories
(ULC) Fire Hazard Classification (when
applied to Douglas Fir)
| Coating
System |
Flame
Spread |
Smoke
Developed |
Primer
– optional
Type 10-10 applied in one coat
at 190 sq. ft./US gal (4.7 sq.
m./L)
Type 40-40 applied in one coat
at 625 sq. ft./US gal (15.3 sq.
m./L)
|
10 |
15 |
When
applied to Asbestos Cement Board
Type 40-40 applied in one coat
at 350 sq. ft./US gal (8.6 sq.
m./L)
|
5 |
5 |
Flame
Control No. 666A Semi Gloss Class “A”
Latex Overcoat is a water
base coating that is fire rated as an
overcoat for Flame Control intumescent
fire retardant paints. It dries quickly
to yield a scrub resistant, water resistant
film that is easy to clean and possesses
excellent adhesion, flexibility and
toughness on all interior surfaces (except
floors). May be tinted at 4 ounces of
colorant per gallon maximum.
Underwriters’ Laboratories
(ULC) Fire Hazard Classification (when
applied to Douglas Fir)
| Coating
System |
Flame
Spread |
Smoke
Developed |
Primer
– optional
Type 320A applied in one coat
at 100 sq. ft./ US gal
Type 666A Overcoat applied in
one coat at 450 sq. ft./US gal
|
25 |
5 |
|
